Table of Contents
Advertisement
MiiNePort E2/E3
ATTENTION
The Real COM driver comes with NPort Windows Driver Manager, which is included on the CD-ROM shipped
with the MiiNePort Starter kit.
ATTENTION
Real COM mode allows several hosts to simultaneously access to the MiiNePort module. The driver controls
host access to attached serial devices by checking the host's IP address against the Accessible IP list. Use the
Accessible IP table to restrict access to the module when a public IP address is required for your application.
Ethernet Modem Mode
Ethernet Modem Mode is designed for use with legacy operating systems, such as MS-DOS, that do not support
TCP/IP Ethernet. By connecting the MiiNePort evaluation board's serial ports to an MS-DOS computer's serial
port, it is possible to use legacy software originally designed to transmit data via modem, but now transmit the
data over the Ethernet.
MCSC Mode (MiiNePort E2 Only)
MCSC (Multiple Channel Serial Communication) was developed for multiple serial-to-Ethernet applications that
use only one serial port. For example, if you need your device to act as a TCP Server and TCP Client at the same
time (as illustrated below), you can use MCSC.
For details on MCSC's functionality and configuration, refer to Chapter 8: NetEZ Technologies' MCSC. MCSC
is only supported on the MiiNePort E2.
Choosing the Proper Operation Mode
3-5
Advertisement
Table of Contents
