Moxa Technologies MiiNePort E2-H User Manual page 123

MiiNePort E2/E3
Community String
Command code: MU
Command parameters: N/A
Reply parameters: MiiNePort's SNMP Community string.
?RMU
!RMU0public
Contact Name
Command code: MN
Command parameters: N/A
Reply parameters: MiiNePort's SNMP Contact Name.
?RMN
!RMN0s_name
Location
Command code: ML
Command parameters: N/A
Reply parameters: MiiNePort's SNMP Location.
?RML
!RML0s_location
Enable/Disable Accessible IP List
Command code: AS
Command parameters: N/A
Reply parameters: Enable (1) or Disable (0) MiiNePort's accessible IP list.
?RAS
!RAS01
Accessible IP List
Command code: AI
Command parameters: The index of accessible IP list (from 1 to 16)
Reply parameters: Return format Mode;IP;Netmask in the accessible IP list. If mode equals 1 it's active,
otherwise it's inactive.
?RAI1
!RAI01;192.168.1.2;255.255.25
5.0
Introduction to SCM (Serial Command Mode) Command Set
System requests SNMP community string for this MiiNePort.
MiiNePort reports SNMP community string as 'public'.
System requests SNMP contact name for this MiiNePort.
MiiNePort reports SNMP contact name as 's_name'.
System requests SNMP location for this MiiNePort.
MiiNePort reports SNMP location as 's_location'.
System requests Enable/Disable accessible IP list for this MiiNePort.
MiiNePort reports accessible IP list as 'Enable'.
System requests first accessible IP list for this MiiNePort.
MiiNePort reports first accessible IP list as 'Active', IP address as
'192.167.1.2', and Netmask as '255.255.255.0' .
A-31