Moxa Technologies MiiNePort E2-H User Manual page 74

MiiNePort E2/E3 Web Console Configuration
We use Channel 1 to illustrate.
All of the configuration items shown in the above screenshot have been discussed earlier in this chapter. Use
the Mode drop-down list to select the operation mode for the channel, and then update the configuration items.
When you click Submit, the following confirmation window will appear.
Click the Close button to return to the initial Operation Modes configuration screen (shown below). At this
point you can click the Modify button for Channel 2 to configure the settings for that channel. The configuration
settings for Channel 1 will be shown, but you are free to update each configuration item. When you click Submit,
the configuration will be saved to the MiiNePort's memory and will not be erased until the next time you change
the configuration.
Click Modify to configure Channel 2. For example, if you want to set Channel 2 to Real COM mode, you need
to finish your Real COM settings and then click Submit.
When the confirmation screen appears, choose either Save/Restart to activate the changes you've made or
Close to do other configurations.
For details on MCSC's functionality and configuration, refer to Chapter 8: NetEZ Technologies' MCSC. MCSC
is only supported on the MiiNePort E2.
7-25