Summary of Contents for Moxa Technologies ioMirror E3200 Series
Page 1
E3200 Series Quick Installation Guide Ethernet Peer-to-Peer I/O Version 1.0, January 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific:...
Page 2
Package Checklist • 1 x ioMirror E3200 Series peer-to-peer I/O product • 1 x quick installation guide (printed) • 1 x LDP1602 LCD module (optional) Specifications Power Parameters Input Voltage 12 to 48 VDC Power Consumption 136 mA @ 24 VDC...
Page 3
DI Wet Contact Alarm Output Mounting There are two ways to mount the ioMirror E3200 Series: DIN-rail or wall mounting. • Mounting on a DIN rail Pull out the bottom slider; latch the unit onto the DIN rail, and then push the slider back in.
Page 4
NOTE Be sure to configure the host PC’s IP address to the same subnet as the ioMirror E3200. For example: 192.168.127.253. Restore Factory Defaults There are three ways to restore the ioLogik to factory default settings. 1. Hold the RESET button for 5 seconds. 2.