Moxa Technologies MiiNePort E2-H User Manual page 98

MiiNePort E2/E3
Location
Command code: ML
Command parameters: N/A
Reply parameters: MiiNePort's SNMP Location.
?GML
!GML0s_location
Enable/Disable Accessible IP List
Command code: AS
Command parameters: N/A
Reply parameters: Enable (1) or Disable (0) MiiNePort's accessible IP list.
?GAS
!GAS01
Accessible IP List
Command code: AI
Command parameters: The index of accessible IP list (from 1 to 16)
Reply parameters: Return format Mode;IP;Netmask in the accessible IP list. If mode equals to 1, it is active,
otherwise it is inactive.
?GAI1
!GAI01;192.168.1.2;255.255.25
5.0
Auto IP Report
Command code: NR
Command parameters: N/A
Reply parameters: MiiNePort's auto IP report setting.
?GNR
!GNR0192.168.1.250:4000;50
Port alias
Command code: SA
Command parameters: Port index.
Reply parameters: MiiNePort's Port alias.
?GSA1
!GSA0port1
Introduction to SCM (Serial Command Mode) Command Set
System requests SNMP location for this MiiNePort.
MiiNePort reports SNMP location as 's_location'.
System requests Enable/Disable accessible IP list for this MiiNePort.
MiiNePort reports accessible IP list as 'Enable'.
System requests first accessible IP list for this MiiNePort.
MiiNePort reports first accessible IP list as 'Active', IP address as
'192.167.1.2', and Netmask as '255.255.255.0'.
System requests auto IP report for this MiiNePort.
MiiNePort reports Auto IP report server as '192.168.1.250' and port as
'4000', and report period as '50'.
System requests port 1 alias for this MiiNePort.
MiiNePort reports Port alias as 'port1'.
A-6