Table of Contents
Advertisement
MiiNePort E2/E3
Abnormal Packets
DLE
0x10
Once the MiiNePort E2 receives a data stream with a header DLE character, followed by characters that are not
SOH, ENG, or DLE characters, the MiiNePort E2 will see this as an abnormal data packet caused by
communication problems and will drop this data packet without sending data out through the Ethernet port.
The MiiNePort E2 will return the channel inquiry command (10 05) to the main serial system through the serial
channel, helping the main system to detect and troubleshoot the problem.
SCM (Serial Command Mode) under MCSC
When MCSC is enabled, a special application channel indexed as 0xFF (channel 256) is dedicated for Moxa SCM
without additional configuration required. SCM enables the controlling system to configure, monitor, or control
the attached embedded device server. For more information about what SCM can do, refer to Chapter 3:
Choosing the Configuration Tool.
With MCSC, normal network communication continues uninterrupted when the controlling system is monitoring
or diagnosing the embedded device server with SCM, providing SCM with greater flexibility.
EZPage
The MiiNePort's EZPage is designed for creating a customized web page to match specific control/monitor
requirements of the serial device via web browser. The MiiNePort creates a built-in web server running with
Java applet support that can be used to develop customized web pages on the MiiNePort.
EZPage is a java applet based program and you can refer or modify Moxa's web console example to develop
specified web console easily. The main entry point of this program is in "src\jar\EZPage.java". EZPage utilizes
Moxa's proprietary NECI protocol to control and modify the configurations.
•
To browse a customized web console, you need to upload your own EZPage to the MiiNePort. Detailed steps
are given in the following section.
•
The hyperlink http://Device's IP/index.htm specifies the location of EZPage content, and it is the first entry
point for users to access the MiiNePort's web console. MiiNePort will redirect the Moxa default web consoles
to http://Device's ip/moxa/home.htm. If a customized web page does not exist, the MiiNePort's default web
console will be shown.
ATTENTION
1. EZPage supports a maximum packed file size of 512 KB.
2. The EZPage example is compiled with JDK V1.6. If necessary, you should recompile this example with
another version of JDK.
OTHER
???
8-8
NetEZ Technologies
Advertisement
Table of Contents
