Led Indicators - Moxa Technologies MiiNePort E2-H User Manual

MiiNePort E2/E3

LED Indicators

MiiNePort Evaluation Board
LED Name
Power
Ready
TXD / LED D3
RXD / LED D4
DTR / LED D5
CTS / LED D6
DSR / LED D7
DCD / LED D8
RTS / LED D9
DO0 / LED D10
DO1 / LED D11
DO2 / LED D12
DO3 / LED D13
Color
Off
Green, Steady On
Green, Blinking every 1
sec.
Green, Blinking every
0.5 sec.
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red
1-11
Description
1. Power is off
2. A power error condition exists
3. System error
Indicates that the power is on.
1. The device server has been located by NPort search
utility's location function.
2. Auto Config complete.
Indicates a LAN IP conflict, or the DHCP or BOOTP server did
not respond properly.
Indicates that TXD has a signal.
Indicates that RXD has a signal.
Indicates that DTR has a signal.
Indicates that CTS has a signal.
Indicates that DSR has a signal.
Indicates that DCD has a signal.
Indicates that RTS has a signal.
Indicates that DO0 is in "low" (0) status.
Indicates that DO1 is in "low" (0) status.
Indicates that DO2 is in "low" (0) status.
Indicates that DO3 is in "low" (0) status.
Introduction