Moxa Technologies MiiNePort E2-H User Manual page 55

MiiNePort E2/E3
The MiiNePort will use the closest baudrate that is supported.
Data Bits
Setting
5, 6, 7, 8
Stop Bits
Setting
1, 1.5, 2
Stop Bits will be set to 1.5 when Data Bits is set to 5 bits.
Parity
Setting
None, Even, Odd,
Space, Mark
Flow control
Setting
None, RTS/CTS,
DTR/DSR, XON/XOFF
FIFO
Setting
Enable, Disable
Each module's serial port provides a 128-byte FIFO both in the Tx and Rx directions. Disable the FIFO setting
when your serial device does not have a FIFO to prevent data loss during communication.
Interface
Setting
RS-232/422/485
Factory Default
8
Factory Default
1
Factory Default
None
Factory Default
RTS/CTS
Factory Default
Enable
Description
RS-232, RS-422/485
7-6
Web Console Configuration
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required