Web Console Fundamentals; Basic Settings; Network Settings - Moxa Technologies MiiNePort E2-H User Manual

MiiNePort E2/E3

Web Console Fundamentals

In the web console, the left panel is the navigation panel. It contains an expandable menu tree for navigating
among the various settings and categories. When you click on a menu item in the navigation panel, the main
window will display the corresponding options for that item.
Configuration changes can then be made in the main window. For example, if you click on Basic Settings 
Network Settings in the navigation panel, the main window will show a page of network settings that you can
configure.
You must click on the Submit button to keep your configuration changes. The Submit button will be located at
the bottom of every page that has configurable settings. If you navigate to another page without clicking the
Submit button, your settings will not be retained.
Changes will not take effect until they are saved and the module is restarted! You may complete this in one step
by clicking on Save/Restart after you submit a change. If you restart the module without saving your
configuration, the module will discard all submitted changes.

Basic Settings

Network Settings

You must assign a valid IP address to the module before it will work in your network environment. Your network
system administrator should provide you with an IP address and related settings for your network. The IP
address must be unique within the network; otherwise the module will not have a valid connection to the
network. First-time users can refer to Chapter 5: Initial IP Address Configuration for more information.
Device name
Setting
1 to 39 characters
This option can be used to specify the location or application of the module, which may be useful when
managing more than one module on the network.
Factory Default
[model name]_[Serial No.]
7-3
Web Console Configuration
Necessity
Optional