To Perform Initial Setup - Agilent Technologies B1500A User Manual

To Perform Initial Setup

After you receive the B1500A, perform the following setup.
1. Make sure that the Standby switch is set to off.
2. On the B1500A rear panel, connect the Circuit Common terminal to the frame
ground terminal by using a shorting-bar.
3. If you use Agilent 16444A-001 USB keyboard and/or the 16444A-002 USB
mouse, connect it to an USB port of the B1500A.
4. Connect the power cable from the B1500A to an AC power outlet.
5. Open the measurement terminals and press the Standby switch to turn on the
B1500A.
If the B1500A is operating correctly, the power-on self-test is automatically
performed. If problems arise, see Agilent EasyEXPERT User's Guide.
6. Wait for the Welcome to Microsoft Windows screen. On the screen, select the
Next button.
7. For the message How should dates and currency appear?, set as follows:
• I live closest to this region: (for example, United States)
• I type mostly in this language: (for example, English)
• I use this type of keyboard: (for example, US)
If you use the 16444A-001 USB keyboard, select US.
8. Select the Next button.
9. For the message What time zone are you in?, select your present location (for
example, Pacific Time (US & Canada); Tijuana). Then select the Next button.
10. For The End User License Agreement, select Yes, I accept. Then select the Next
button.
11. For the message Help protect your PC, select Not right now. Then select the
Next button.
12. For the message What's your computer's name?, do not anything. Just select the
Next button.
13. For the message What's your Administrator password?, do not anything. Just
select the Next button.
14. For the message Checking your internet connectivity, select the Skip button.
Agilent B1500A User's Guide, Edition 10
Installation
Inspection and Installation
3- 7