WARNING
NOTE
NOTE
Installation
About Plug-in Modules
About Plug-in Modules
Agilent Technologies is responsible for the module installation of Agilent B1500A.
Contact Agilent Technologies for the module installation. Then send the following
equipment and accessories to Agilent Technologies.
•
B1500A
•
Plug-in modules to be installed
•
ASU, for installing the exclusive HRSMU or retrofitting ASU only
•
Connection cable between ASU and HRSMU, for installing the exclusive
HRSMU or retrofitting ASU only
•
RSU, for installing WGFMU
•
Connection cable between RSU and WGFMU, for installing WGFMU
For returning ASU or RSU, do not forget to notify the combination of the unit,
connection cable, and module channel.
To prevent electrical shock, turn off Agilent B1500A and remove the power
cable before removing the connection cables.
About B1500A which supports SPGU and WGFMU
SPGU and WGFMU are supported by the B1500A serial numbered JP40Nxxxxx and
later. The other B1500A needs the mainframe upgrade to support the module.
Contact Agilent Technologies to upgrade the B1500A.
Module locations after servicing
After the module installation, upgrade, and so on, the B1500A will be returned with
the module configuration decided by the rule shown in Table 3-12. If you want to
change the module locations, consult the service personnel before servicing.
3- 56
Agilent B1500A User's Guide, Edition 10