Agilent Technologies B1500A User Manual page 45

• Agilent 16440A SMU/PGU pulse generator selector (B1500A-A04)
Used to switch the measurement resource connected to the DUT. The
measurement resource can be SPGU or SMU. Needs the 16445A adapter to use
the selector. One selector provides two switching channels.
• Agilent 16442B test fixture (B1500A-A5F)
Test fixture for semiconductor parameter analyzers and device analyzers.
Provides three Kelvin triaxial connectors (six non-Kelvin triaxial connectors)
for connecting SMU, six BNC connectors for connecting SPGU, MFCMU, or
other instruments, a GNDU connector, and an Intlk connector. Furnished with
the dual-in-line package socket module, universal socket modules (two types),
blank Teflon board, and connection wires for device connection.
• Agilent 16445A selector adapter
Used to connect the 16440A selector (B1500A-A04) to the B1500A. Two
selectors can be connected.
• Agilent E5288A ASU
Atto sense and switch unit (ASU). Used to enable the 1 pA range for the atto
level current measurement, also switch the measurement resource connected to
the DUT. The measurement resource can be HRSMU or the instrument
connected to the AUX terminal.
• Agilent N1301A-100 SCUU
SMU CMU unify unit (SCUU). Used to switch the measurement resource
connected to the DUT. The measurement resource can be CMU or one of two
SMUs connected to the SCUU.
• Agilent N1301A-200 GSWU
Guard switch unit (GSWU). Needs the SCUU to use the GSWU. Effective for
the accurate impedance measurements by connecting the guard lines between
CMU high and low near the DUT.
Agilent B1500A User's Guide, Edition 10
Introduction
Overview
2- 5