Agilent Technologies B1500A User Manual page 82

NOTE
NOTE
Installation
Inspection and Installation
15. For the message Thank you!, select the Finish button. Agilent Recovery Image
Setup dialog box is displayed.
16. For the dialog box, click OK.
The initial setup will be completed. And the B1500A internal Windows will have
the following setup.
• Location: United States
• Language: English
• Keyboard: English (US)
• Time Zone: Pacific Time (US & Canada); Tijuana
• Network connection: none
• Computer name: Unique name set by factory
You can change the computer name after the initial setup. It must be unique.
• Password of Administrator: not defined
You can set the password after the initial setup. If you set it, do not forget it.
• Pre-defined users: Administrator, Agilent B1500 User, and AgilentOnly
You can add users after the initial setup. Add users as you need.
Agilent B1500 User is the account for automatic logon. Password is not set to
this account.
AgilentOnly is the account for Agilent service personnel. Do not delete this
account. This account is password protected.
Other Windows setup
You can set other setup of Windows after the initial setup. It is your responsibility.
If you connect Agilent B1500 to the network, take care to protect it from computer
virus.
Agilent Technologies cannot guarantee the performance and provide compatibility
information for all B1500s under several conditions. If problems arise, perform
Agilent B1500 system recovery. To perform recovery, see Agilent EasyEXPERT
User's Guide.
3- 8 Agilent B1500A User's Guide, Edition 10