Agilent Technologies B1500A User Manual page 163

The V Monitor terminal outputs a buffered signal equal to 1/10 of the Output
terminal voltage (into a 50  load).
• WGFMU to RSU cable length
The WGFMU and RSU are connected by a special composite cable. The
following configurations are available.
• 3 m
• 5 m
• 1.5 m
• 2.4 m + connector adapter + 0.6 m
• 4.4 m + connector adapter + 0.6 m
Note: The connector adapter is used when routing the cable through the prober's
connector panel.
• ALWG function: See Table 4-21.
• Trigger output
Level: TTL
Trigger width: 10 ns
Generated synchronously with ALWG waveform.
• Software
• Instrument library for WGFMU control (supported operating systems:
Microsoft Windows XP Professional SP2 and Vista Business SP1)
• NBTI and general-purpose EasyEXPERT Application Tests
• Sample programs (NBTI and general-purpose measurement using WGFMU
and RTS data analysis)
• WGFMU supported prober vendors
Cascade Microtech
Suss MicroTec
Vector Semicon
Note: The maximum number of installable RSUs for a given prober depends
upon the available space. Please contact your local sales representative for
details on connecting and mounting the WGFMU and RSU.
Agilent B1500A User's Guide, Edition 10
Specifications
Hardware
4- 31