Agilent Technologies B1500A User Manual page 96

To install 16495K
Before starting
Figure 3-5
Installation
Installing Accessories
Fix your necessary 16495 connector plates to the shielding box or something that
will cover the DUT interface. See Agilent 16495 Installation Guide. For the GSWU
installation, the 16495K is required. It is the plate that has the mechanism to block
the light from the cable hole used to pass the cables in the shielding box.
1. GSWU is furnished with wires (2 ea.) for the connection between the GSWU
and the DUT interface Guard terminal. If it is too short to connect them, prepare
additional wire.
2. Turn the B1500A off.
To Connect SCUU/GSWU
3- 22 Agilent B1500A User's Guide, Edition 10