At+Cmee Report Mobile Termination Error - Quectel BC95 Manual

Neul Hi2110 Implementation

Only <fun>=0&1 are supported.

<rst> is not supported and will be ignored.

3.15. AT+CMEE Report Mobile Termination Error

Set command disables or enables the use of final result code +CME ERROR: <err> as an indication of an
error relating to the functionality of the MT. When enabled, MT related errors cause +CME ERROR: <err>
final result code instead of the regular ERROE final result code. ERROR is returned normally when error
is related to syntax, invalid parameters or TA functionality.
Read command returns the current setting of <n>.
Test command returns values supported as a compound value.
Refer to Chapter 6 for possible <err> values.
AT+CMEE Report Mobile Termination Error
Set Command
AT+CMEE=<n>
Read Command
AT+CMEE?
Test Command
AT+CMEE=?
Parameter
<n> Integer type
0 Disable +CMEE ERROR: <err> result code and use ERROR instead
1 Enable +CMEE ERROR: <err> result code and use numeric <err> values (Refer
to Chapter 6 for possible <err> values)
2 Enable +CMEE ERROR: <err> result code and use verbose <err> values
Neul Hi2110 Implementation

Only <n>=0 & <n>=1 are supported.
BC95_AT_Commands_Manual
Response
OK
Response
+CMEE:<n>
OK
Response
+CMEE:(list of supported<n>s)
OK
Confidential / Released
NB-IoT Module Series
BC95 AT Commands Manual
34 / 58