At+Cgclass Gprs Mobile Station Class - Quectel M35 Command Manual

Write Command
AT+CGPADDR=<cid>
Reference
GSM 07.07
Parameter
<cid> A numeric parameter which specifies a particular PDP context definition (see +CGDCONT
command)
<PDP_addr> A string that identifies the MT in the address space applicable to the PDP. The address may
be static or dynamic. For a static address, it will be the one set by the +CGDCONT
command when the context was defined. For a dynamic address it will be the one assigned
during the last PDP context activation that used the context definition referred to <cid>.
<PDP_ address> is omitted if none is available
NOTE
This command dictates the behavior of PPP in the ME but not that of any other GPRS-enabled
foreground layer, e.g. browser.
Example
AT+CGDCONT=1,"IP","CMNET"
OK
AT+CGACT=1,1
OK
AT+CGPADDR=1
+CGPADDR: 1,"10.76.51.180"
OK

10.8. AT+CGCLASS GPRS Mobile Station Class

AT+CGCLASS GPRS Mobile Station Class
Test Command
AT+CGCLASS=?
M35_AT_Commands_Manual
OK
Response
+CGPADDR: <cid>,<PDP_addr>
OK
ERROR
// Define PDP context
// Activated PDP
// Show PDP address
Response
+CGCLASS: (list of supported <class>s)
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
117 / 186