Defining the
Measurement
Document Part No. E5500-90024Ed. 1.0
Figure 13-1
shows the configuration used for an AM noise
measurement.
Figure 13-1 AM Noise Measurement Configuration
1
From the File menu, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose "AM_noise_1ghz_8644b.pnm." See
Figure
13-2.
Figure 13-2 Select the Parameters Definition File
4
Choose the OK button. The appropriate measurement definition
parameters for this example have been pre-stored in this file.
(Table 13-3
lists the parameter data that has been entered for this
measurement example.)
E5500 Phase Noise Measurement System Version A.02.00
AM Noise Measurement Examples
AM Noise using an Agilent 70420A Option 001
13
13-3