Table of Contents
Advertisement
Figure 3-4
Navigating to the Define Measurement Window.
Beginning the
Measurement
Document Part No. E5500-90024Ed. 1.0
6
Click the Close button.
1
From the Measure menu, choose New Measurement
Figure 3-5 Navigating to the New Measurement Window
2
When the Perform a New Calibration and Measurement? dialog
box appears, click Yes.
When the Connect Diagram dialog box appears, connect the 50 Ω
3
termination, provided with your system, to the Agilent 70420A
test set's noise input connector. Refer to
information about the correct placement of the 50 Ω termination.
E5500 Phase Noise Measurement System Version A.02.00
Your First Measurement
Making a Measurement
(Figure
3-5).
Figure 3-6
for more
3
3-7
Advertisement
Table of Contents
