Table of Contents
Advertisement
Figure 11-20Select Measurement Type
Document Part No. E5500-90024Ed. 1.0
Discriminator Measurement using FM Rate and Deviation Calibration
4
Click the Open button.
The appropriate measurement definition parameters for this
example have been pre-stored in this file.
parameter data that has been entered for the FM discriminator
measurement example.)
5
From the Define menu, choose Measurement; then choose the
Type and Range tab from the Define Measurement window.
6
From the Measurement Type pull-down, select Absolute Phase
Noise (using an FM discriminator). See
E5500 Phase Noise Measurement System Version A.02.00
FM Discriminator Measurement Examples
Table 11-6
Figure
11-20.
11
lists the
11-23
Advertisement
Table of Contents
