Table of Contents
Advertisement
9
Residual Measurement Examples
Amplifier Measurement Example
Figure 9-14 Adjust Phase Shifter until Meter Indicates 0 Volts
When the
Measurement is
Complete
9-14
E5500 Phase Noise Measurement System Version A.02.00
5
The system will now measure the noise data.
The system can now run the measurement. The segment data will be
displayed on the computer screen as the data is taken until all
segments have been taken over the entire range you specified in the
Measurement definition's Type and Range.
When the measurement is complete, refer to
Your Measurement Results" for help in evaluating your measurement
results.
Figure 9-15
shows a typical phase noise curve for an RF Amplifier.
Chapter
15, "Evaluating
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
