Table of Contents
Advertisement
5
Expanding Your Measurement Experience
Using the Asset Manager to Add a Source
5-4
E5500 Phase Noise Measurement System Version A.02.00
Figure 5-3 Navigate to Add in the Asset Manager
6
From the Asset Type pull-down list in Choose Asset Role dialog
box
(Figure
5-4), select Source, then click the Next button.
Figure 5-4 Select Source as Asset Type
7
Click on the source to be added, then click the Next button. See
Figure
5-5.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
