Table of Contents
Advertisement
Defining the
Measurement
NOTE
Expanding Your Measurement Experience
Testing the Agilent/HP 8644B Internal/External 10 MHz
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose "Conf_8644B_10MHz.pnm".
4. Click the Open button.
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
parameter data that has been entered for the RF Synthesizer using
DCFM measurement example.)
Note that the source parameters entered for step 2 in
appropriate for the reference source you are using. To change these values,
refer to
Table 5-8 on page
to
"Beginning the Measurement" on page
5-34 Agilent Technologies E5500 Phase Noise Measurement System
Table 5-8 on page 5-54
5-54, then continue with step "a". Otherwise, go
5-39:
lists the
Table 5-8
may not be
Advertisement
Table of Contents
