Table of Contents
Advertisement
7
Absolute Measurement Examples
RF Synthesizer using DCFM
Defining the
Measurement
7-36
E5500 Phase Noise Measurement System Version A.02.00
1
From the File menu, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose "RFSynth_DCFM.pnm". See
Figure
7-23.
Figure 7-23 Select the Parameters Definition File
4
Click the Open button.
The appropriate measurement definition parameters for this
example have been pre-stored in this file.
parameter data that has been entered for the RF Synthesizer
using DCFM measurement example.)
NOTE: Note that the source parameters entered for step 2 in
Table 7-12
may not be appropriate for the reference source you are
using. To change these values, refer to
step 5
below. Otherwise, go to
page 7-42:
Table 7-12
Table
7-10, then continue with
"Beginning the Measurement"
Document Part No. E5500-90024 Ed. 1.0
lists the
on
Advertisement
Table of Contents
