Table of Contents
Advertisement
3
Your First Measurement
Making a Measurement
Making a Measurement
3-6
E5500 Phase Noise Measurement System Version A.02.00
This first measurement is a confidence test that functionally checks
the Agilent 70420A test set's filters and low-noise amplifiers using
the test set's internal noise source. The phase detectors are not
tested. This confidence test also confirms that the test set, PC, and
analyzers are communicating with each other.
1
From the File menu in the E5500 User Interface, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose Confidence.pnm
4
Click the Open button.
Figure 3-3 Opening the File Containing Pre-stored Parameters
The appropriate measurement definition parameters for this
example have been pre-stored in this file.
parameter data that has been entered for the Agilent 70420A
confidence test example.
5
To view the parameter data in the software, navigate to the
Define Measurement window use
guide. The parameter data is entered using the tabbed windows.
Select various tabs to see the type of information entered behind
each tab.
(Figure
3-3).
Table 3-1
lists the
Figure 3-4
as a navigation
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
