Table of Contents
Advertisement
5
Expanding Your Measurement Experience
Testing the Agilent 8663A Internal/External 10 MHz
Selecting a
Reference Source
Figure 5-14 Selecting a Reference Source
Selecting Loop
Suppression
Verification
5-14
E5500 Phase Noise Measurement System Version A.02.00
1
Using
Figure 5-14
as a guide, navigate to the Block Diagram tab.
2
From the Reference Source pull-down list, select Agilent-8663.
3
When you have completed these operations, click the Close
button
.
1
Using
Figure 5-15
as a guide, navigate to the Cal tab.
2
Check Verify calculated phase locked loop suppression and
Always Show Suppression Graph. Select If limit is exceeded:
Show Loop Suppression Graph.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
