Document Part No. E5500-90024Ed. 1.0
8
Enter the carrier (center) frequency of your UUT. Enter the same
frequency for the detector input frequency. See
Figure 13-4 Enter Frequencies in Source Tab
9
Choose the Cal tab from the Define Measurement window.
10 Select Use automatic internal self-calibration as the calibration
method. See
Figure
calibration techniques, refer to
Measurement Fundamentals".
E5500 Phase Noise Measurement System Version A.02.00
AM Noise Measurement Examples
AM Noise using an Agilent 70420A Option 001
13-5. For more information about various
Chapter
12, "AM Noise
13
Figure
13-4.
13-5