Table of Contents
Advertisement
5
Expanding Your Measurement Experience
Testing the Agilent 8644B Internal/External 10 MHz
Figure 5-26 Selecting Loop Suppression Verification
Setup
Considerations for
the Agilent 8663A
10 MHz
Measurement
5-32
E5500 Phase Noise Measurement System Version A.02.00
The signal amplitude at the R input (Signal Input) port on the Agilent
70420A sets the measurement noise floor level. Use the following
graph and example
(Figure 5-27
amplitude required to provide a noise floor level that is below the
expected noise floor of your UUT. For more information about this
graph, refer to
Chapter
and
Figure
5-28) to determine the
17, "Reference Graphs and Tables".
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
