Table of Contents
Advertisement
Document Part No. E5500-90024Ed. 1.0
Discriminator Measurement using FM Rate and Deviation Calibration
10 Set the FM Rate to 20 kHz and FM Deviation to 10 kHz, which
are the recommended FM rate and deviation. See
Figure 11-22Enter Parameters into the Cal Tab
11 Choose the Block Diagram tab from the Define Measurement
window. See
Figure
a
From the Reference Source pull-down, select Manual.
b
From the Phase Detector pull-down, select Automatic
Detector Selection.
E5500 Phase Noise Measurement System Version A.02.00
FM Discriminator Measurement Examples
11-23.
11
Figure
11-22.
11-25
Advertisement
Table of Contents
