Table of Contents
Advertisement
11
FM Discriminator Measurement Examples
Discriminator Measurement using FM Rate and Deviation Calibration
Figure 11-18Discriminator Noise Floor as a Function of Delay Time
Defining the
Measurement
11-22
E5500 Phase Noise Measurement System Version A.02.00
8 feet of BNC cable specified in this example is negligible.) The
Agilent 70420A test set Signal and Reference inputs requires +15
ICBM.
1
From the File menu, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose "vco_r&d.pnm." See
Figure 11-19Select the Parameters Definition File
Figure
11-19.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
