Table of Contents
Advertisement
Figure 13-10Connect Diagram Example
Making the
Measurement
When the
Measurement is
Complete
Document Part No. E5500-90024Ed. 1.0
Press the Continue key when you are ready to make the
measurement.
For more information about various calibration techniques, refer to
Chapter
12, "AM Noise Measurement Fundamentals".
The system is now ready to make the measurement. The
measurement results will be updated on the computer screen after
each frequency segment has been measured.
When the measurement is complete, refer to
Your Measurement Results" for help in evaluating your measurement
results.
Figure 13-11
shows a typical AM noise curve.
E5500 Phase Noise Measurement System Version A.02.00
AM Noise Measurement Examples
AM Noise using an Agilent 70420A Option 001
Chapter
13
15, "Evaluating
13-11
Advertisement
Table of Contents
