Table of Contents
Advertisement
Beginning the
Measurement
Figure 11-8 Select Meter from View Menu
Document Part No. E5500-90024Ed. 1.0
FM Discriminator Measurement using Double-Sided Spur Calibration
1
From the View menu, choose Meter to select the quadrature
meter. See
Figure
11-8.
2
From the Measurement menu, choose New Measurement. See
Figure
11-9.
Figure 11-9 Selecting a New Measurement
3
When the Perform a New Calibration and Measurement?
prompt appears, click OK.
4
When the Connect Diagram dialog box appears, confirm your
connections as shown in the connect diagram. See
The Agilent 70420A test set's signal input is subject to the limits
and characteristics shown in
E5500 Phase Noise Measurement System Version A.02.00
FM Discriminator Measurement Examples
Table
11-2:
11
Figure
11-10.
11-11
Advertisement
Table of Contents
