Table of Contents
Advertisement
8
Residual Measurement Fundamentals
Calibration Options
Figure 8-8 Adjust for Quadrature
Figure 8-9 Measuring Power at Phase Detector Reference Input Port
8-12
E5500 Phase Noise Measurement System Version A.02.00
NOTE: For the system to accept the adjustment to quadrature, the
meter must be within ± 2 mV to ± 4 mV.
8
Once you have attained quadrature, you are ready to proceed
with the measurement.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
