Table of Contents
Advertisement
Table 14-1 Parameter Data for the Baseband Using a Test Set Measurement
Step
Parameters
4
Test Set Tab
• Input Attenuation
LNA Low Pass Filter
• LNA Gain
• DC Block
• PLL Integrator Attenuation
5
Graph Tab
• Title
• Graph Type
• X Scale Minimum
• X Scale Maximum
• Y Scale Minimum
• Y Scale Maximum
• Normalize trace data to a:
• Scale trace data to a new carrier
frequency of:
• Shift trace data DOWN by:
• Trace Smoothing Amount
• Power present at input of DUT
Document Part No. E5500-90024Ed. 1.0
Baseband Noise using a Test Set Measurement Example
Data
• 0 dB
• 20 MHz (Auto checked)
• Auto Gain (Minimum Auto Gain - 14 dB)
• Not checked
• 0 dBm
• Baseband using the Agilent 70420A Test Set
• Baseband Noise (dBV)
• 10 Hz
• 100 E + 6 Hz
• 0 dBc/Hz
• - 200 dBV/Hz
• 1 Hz bandwidth
• 1 times the current carrier frequency
• 0 dB
• 0
• 0 dB
E5500 Phase Noise Measurement System Version A.02.00
Baseband Noise Measurement Examples
14
14-5
Advertisement
Table of Contents
