Table of Contents
Advertisement
Defining the
Measurement
Document Part No. E5500-90024Ed. 1.0
1
From the File menu of the E5500 User Interface, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose "FreeRF.pnm". See
Figure 7-12 Select the Parameters Definition File
4
Click the Open button.
The appropriate measurement definition parameters for this
example have been pre-stored in this file.
parameter data that has been entered for the Free-Running RF
Source measurement example.)
NOTE: Note that the source parameters entered for step 2 in
Table 7-8
may not be appropriate for the reference source you are
using. To change these values, refer to
step 5
below. Otherwise, go to
page 7-25.
E5500 Phase Noise Measurement System Version A.02.00
Absolute Measurement Examples
Free-Running RF Oscillator
Table 7-8
Table
7-6, then continue with
"Beginning the Measurement"
7
Figure 7-12
lists the
on
7-19
Advertisement
Table of Contents
