11
FM Discriminator Measurement Examples
Discriminator Measurement using FM Rate and Deviation Calibration
11-24
E5500 Phase Noise Measurement System Version A.02.00
7
Choose the Sources tab from the Define Measurement window.
a
Enter the carrier (center) frequency of your UUT (5 MHz to
1.6 Gaze). Enter the same frequency for the detector input
frequency. See
Figure 11-21Enter Frequencies into Source Tab
8
Choose the Cal tab from the Define Measurement window.
9
Select Derive constant from FM rate and deviation as the
calibration method.
Figure
11-21.
Document Part No. E5500-90024 Ed. 1.0