Adaptive Control For Starting - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
%
4
700
600
500
2
400
300
200
1
100
10 20 30
1 Parameter 2-3 Initial Current
3 Parameter 2-4 Current Limit
Illustration 27: Example of Current Ramp Soft Starting

9.8.3 Adaptive Control for Starting

In an adaptive control soft start, the soft starter adjusts the current to start the motor within a specified time and using a selected
acceleration profile.
The soft starter applies the current limit on all soft starts, including adaptive control. If the current limit is too low or the start
ramp time (set in parameter 2-2 Start Ramp Time) is too short, the motor may not start successfully.
%
100
90
80
70
60
50
40
30
20
10
0
1 Early acceleration
3 Late acceleration
Illustration 28: Example of Adaptive Control Start (Parameter 2-5 Adaptive Start Profile)
Danfoss A/S © 2018.10
3
40 50 60 70 80
Time
4
1
2
3
Time
%
90 100
2 Parameter 2-2 Start Ramp Time
4 Full voltage current
N O T I C E
2 Constant acceleration
4 Parameter 2-2 Start Ramp Time
Operation
AQ262141844215en-000202 / 175R1174 | 59