Auto-Start/Stop; Network Address - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
Illustration 13: USB Directory

6.8 Auto-start/Stop

Context:
The soft starter can be configured to automatically start and/or stop the motor at a particular time, or run it in cycles of a specified
duration.
The Auto-Start/Stop function in Set-up Tools gives quick access to the auto-start/stop parameters.
Procedure
1. Press [Menu] and select Set-up Tools.
2. Scroll to Auto-Start/Stop and press [Menu/Store].
Auto-Start/Stop
Start/Stop Mode
Start/Stop Sunday
Start/Stop Monday
3. Scroll to the desired function and press [Menu/Store].
4. Adjust the settings as required:
A Press [Menu/Store] and [Back] to select which information to edit.
B Press [▵] [▿] to change the value.
Press [Menu/Store] to save changes. The soft starter confirms the changes.
Press [Back] to cancel the changes.

6.9 Network Address

To use the VLT® Soft Starter MCD 600 on an Ethernet network, separate addresses must be configured for:
Danfoss A/S © 2018.10
Set-up Tools
AQ262141844215en-000202 / 175R1174 | 43