Table of Contents
Advertisement
Service Manual Danfoss Icon2™
Thermal actuators
New installation
The Icon2™ Master Controller actuator outputs use 230V
Description:
TWA-A 230V NC thermal actuator
with connection for Danfoss
valves/ oor heating manifolds
Part number:
088H3112
Replacing an existing installation
Do you need to replace existing controls that already use 24V actuators for each
oor heating group? This optional converter transformer allows you to convert the
230V actuator outputs on the Icon2™ Master Controller to 24V outputs.
Description:
Converter Transformer
230V
24V
Insert into Icon2™ Master Controller
Part number:
088U2140
AB432956914381en-010101
Description:
TWA-K 230V NC thermal actuator
with M30 connection for valves and oor
heating manifolds with M30
Part number:
088H3142
Wireless connectivity
Optional smartphone control
If the Icon2™ Master Controller is wirelessly connected to the Ally™
Gateway, the system can be controlled from inside or outside the
home using an App.
Description:
Danfoss Ally™ Zigbee Gateway
Grid power supply
Part number:
using supplied USB
014G2400
cable and adapter
Fixed internet router connection
Extending the wireless range
A wireless signal gets weaker as it travels. Metal surfaces and metal in
constructions in particular can block the signal. The Danfoss Icon2™ Zigbee
repeater can help you improve your thermostats' connection. If the Icon2™
Master Controller is installed in an enclosure, you can add an external antenna.
Description:
Danfoss Icon2™ Zigbee Repeater
Part number:
088U1131
© Copyright Danfoss Climate Solutions | 2023.01 | 5
using supplied RJ45 cable
Description:
Danfoss Icon2™ External Antenna
Part number:
088U2141
Advertisement
Table of Contents
