Usb Save & Load - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
Procedure
1. Press [Menu] and select Set-up Tools.
2. Scroll to Load/Save Settings and press [Menu/Store].
Load/Save Settings
Load Defaults
Load User Set
Save User Set
3. Scroll to the required function and press [Menu/Store].
4. At the confirmation prompt, select Yes to confirm or No to cancel.
5. Press [Menu/Store] to proceed.
When the action has been completed, the screen birefly shows a confirmation message, then returns to the previous menu level.
6.7 USB Save & Load
The USB Save & Load menu allows:
• Saving parameter settings and all event log entries to an external file (CSV format).
• Saving parameter settings to an external file (proprietary format).
• Loading parameter settings from a previously saved external file.
• Loading custom messages to show on the LCP when a programmable input is active.
The VLT® Soft Starter MCD 600 supports FAT32 file systems. The MCD 600 USB functions are not compatible with NTFS file
systems.
Danfoss A/S © 2018.10
N O T I C E
Set-up Tools
AQ262141844215en-000202 / 175R1174 | 41