Parameter Group 1-** Motor Details - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
Parameter group number
33-1
33-2
33-3
33-4
33-5
34
34-1
34-2
34-3
34-4
35
35-1
35-2
36
36-1
36-2
36-3
36-4
36-5
36-6
36-7
36-8
36-9
36-10

10.5 Parameter Group 1-** Motor Details

Table 20: 1-1 - Command Source
Option Function
Selects the command source for controlling the soft starter.
* Digital input The soft starter accepts start and stop commands from the digital inputs.
Network The soft starter accepts start and stop commands from the communication expansion card.
Remote LCP The soft starter accepts start and stop commands from the remote LCP.
Clock The soft starter accepts starts and stops as scheduled in parameters 4-1 to 4-24.
Smart card The soft starter accepts start and stop commands from the smart card.
Danfoss A/S © 2018.10
Parameter group name
Pressure Control Mode
Start Pressure Level
Start Response Delay
Stop Pressure Level
Stop Response Delay
Depth Protection
Depth Trip Level
Depth Reset Level
Depth Start Delay
Depth Response Delay
Thermal Protection
Temperature Sensor Type
Temperature Trip Level
Pump Trip Action
Pressure Sensor
Flow Sensor
Depth Sensor
High Pressure
Low Pressure
High Flow
Low Flow
Flow Switch
Well Depth
RTD/PT100 B
Programmable Parameters
Default setting
Off
5
00:00:500 (mm:ss:ms)
10
00:00:500 (mm:ss:ms)
5
10
00:00:500 (mm:ss:ms)
00:00:500 (mm:ss:ms)
None
40
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
Soft Trip and Log
AQ262141844215en-000202 / 175R1174 | 77