Adjusting The Display Contrast; Soft Starter Status Leds - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
3 Menu Back: Exit the
navigation menu or
keys: parameter,
or cancel a
parameter
change.
5 Local control keys.
Illustration 19: Remote LCP

8.3 Adjusting the Display Contrast

Context:
The local and remote LCPs can be adjusted independently.
1. Press and hold [Back].
2. Press [▵] to lighten the display, or press [▿] to darken the display.

8.4 Soft Starter Status LEDs

Ready Run
Illustration 20: Status LEDs on LCP
Table 17: LED Descriptions
LED name On
Ready The motor is stopped and the soft start-
er is ready to start.
Run The motor is in run state (receiving full
voltage).
50 | Danfoss A/S © 2018.10
Menu/Store: Arrow keys:
Enter a menu Scroll to the
or parameter, next or previous
or save a menu or
parameter parameter,
change. change the
setting of the
current
parameter, or
scroll through
the status
screens.
Trip Local
N O T I C E
Flashing
The motor is stopped and the soft starter is not ready to start:
• Waiting for the restart delay (parameter 5-16 Restart Delay).
• The thermal models indicate that the soft starter and/or motor are too
hot to start safely.
• The reset input (RESET, COM+) is open.
The motor is starting or stopping.
LCP and Feedback
AQ262141844215en-000202 / 175R1174