Parameter Group 36-** Pump Trip Action - Danfoss VLT MCD 600 Operating Manual

Operating Guide | VLT® Soft Starter MCD 600
Table 232: 35-1 - Temperature Sensor Type
Option Function
Selects which type of sensor is associated with the temperature sensor input on the smart card.
* None
PT100
Table 233: 35-2 - Temperature Trip Level
Range Function
* 40 ° 0–240 ° Sets the trip point for temperature protection. Use parameter 10-2 Temperature Scale to configure the tempera-
ture scale.

10.24 Parameter Group 36-** Pump Trip Action

Table 234: 36-1 - Pressure Sensor
Option
* Soft and Trip Log
Soft Trip and Reset
Trip Starter
Trip and Reset
Warn and Log
Log Only
Table 235: 36-2 - Flow Sensor
Option
* Soft Trip and Log
Soft Trip and Reset
Trip Starter
Trip and Reset
Warn and Log
Log Only
Table 236: 36-3 - Depth Sensor
Option
* Soft Trip and Log
Danfoss A/S © 2018.10
Function
Selects the soft starter's response if it detects a fault with the pressure sensor.
Function
Selects the soft starter's response if it detects a fault with the flow sensor.
Function
Selects the soft starter's response if it detects a fault with the depth sensor.
Programmable Parameters
AQ262141844215en-000202 / 175R1174 | 117