VLT® Soft Starter MCD 600
Operating Guide
If parameter 1-1 Command Source is set to Remote Keypad, removing the remote LCP causes a trip.
1
READY
RUN
2
BACK
3
LOGS
Illustration 25: Remote LCP
1
Four-line display for status and programming de-
tails.
2
Status LEDs.
3
Menu navigation keys
1
•
Back: Exit the menu or parameter, or cancel a parameter change.
•
Menu/Store: Enter a menu or parameter, or save a parameter change.
•
Arrow keys: Scroll to the next or previous menu or parameter, change the setting of the current parameter, or scroll through the status screens.
2
•
Logs: Open the Logs Menu.
•
Graph: Select which graph to view, or pause/restart the graph (hold longer than 0.5 s).
•
Tools: Open the Setup Tools.
8.3 Adjusting the Display Contrast
The local and remote LCPs can be adjusted independently.
1.
Press and hold [Back].
2.
Press [▵] to lighten the display, or press [▿] to darken the display.
Danfoss A/S © 2020.12
N O T I C E
TRIP
LOCAL
CMD
4
RESET
MENU
5
MENU
STORE
Alt
6
TOOLS
GRAPH
(1)
N O T I C E
4
Shortcut to the command source menu in Set-up
Tools.
5
Local control keys.
6
Shortcut keys for quick access to common tasks
AQ262141844215en-000401 / 175R1174 | 57
LCP and Feedback
(2)