List Of Memory Switch Settings - Brother HE-800C Instruction Manual

7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)

7-2-1. List of memory switch settings

No.
Work clamp height when treadle is depressed
001 Settings can be made in units of 1 mm.
Work clamp height when treadle is at neutral position
002 Settings can be made in units of 1 mm.
Work clamp operation when treadle is depressed to the 1st step.
* When using a triple pedal (optional part), this number will not be displayed.
003
1: Work clamp does not drop to intermediate position
2: Work clamp drops to intermediate position
Work clamp height (mm) when dropped to intermediate position
* Displayed when No. 003 above is set to "2".
004
Settings can be made in units of 0.1 mm.
Parameter number assignment for FUNC key
Functions can be assigned to the FUNC key to make it operate as a seventh
shortcut key.
300 OFF: No assignment
(The help screen is displayed while the FUNC key is pressed.)
1–60: When the FUNC key is pressed, the parameter setting screen for the
number which has been set is displayed.
Display screen contrast
You can change the degree of contrast. The higher the number, the stronger
301
the contrast.
Counter display during automatic sewing mode
The contents appearing at (1) in the display during automatic sewing mode
can be set to either the lower thread counter display or the production counter
display.
302
Cutter size (mm)
501
Settings can be made in units of 0.1 mm.
502 Double cutting setting
Correction of cutter Y position
The cutter position relative to the sewing pattern can be corrected in the Y
700 direction.
Settings can be made in units of 0.025 mm.
57
Setting items
HE-800C
Setting range
1–13
1–13
1–2
0.1–8.0
OFF, 1–60
1–15
1: Lower thread
counter
2: Production
counter
4926M
4.0–32.0
ON, OFF
-0.800–0.800
Default
value
13
10
1
1.0
OFF
10
1
13.0
OFF
0