4-6. Reading memory switch data
Exit data read/write mode.
Select the [R3] data read/write mode.
Refer to "4-3. Preparation for reading and writing data".
Press the ENTER key.
• The buzzer will sound and the memory switch data
will be read from the SD card into the sewing
machine's internal memory.
• The R/W indicator will flash and "OPERATING" will
• If no memory switch data exists on the SD card, an
error buzzer will sound.
When the display returns to the status in step 1, reading of
the memory switch data is complete.
• If you would like to read more data, press the
key to select the read/write menu, and then read
Press any one of the following four keys to exit data
4. USING SD CARDS