Download  Print this page

Function Settings (operation Panel); Basic Function Setting Method - Brother S-7000DD Service Manual

Single needle direct drive straight lock stitcher with thread trimmer.
Hide thumbs

Advertisement

2. FUNCTION SETTINGS (OPERATION PANEL)

2-1. Basic function setting method

Change to basic function setting mode
1
(While pressing the thread trimming disable/F1 key, turn on the power switch.)
Select the setting item (Refer to <Setting item list> (next page))
2
(Setting item)
Change to the setting value display
3
Change the setting value
4
(Setting value)
5
Confirm the setting value
6
To set other items, repeat the operations in steps 2 to 5 and change the settings.
7
• When the D
displayed.
• When the C
displayed.
(Setting value)
* If the setting value is different from the original details, the setting
value will flash.
NOTE:
If the SEL key (1) is pressed once more, the ABCD indicator will
switch off and the display will return to the setting item.
(Setting item)
Basic function setting mode will be exited and normal operation will be
possible.
S-7000DD
2. FUNCTION SETTINGS (OPERATION PANEL)
(Setting item)
key is pressed, the next setting item is
key is pressed, the previous setting item is
2

Advertisement

Table of Contents

   Also See for Brother S-7000DD

   Related Manuals for Brother S-7000DD

Comments to this Manuals

Symbols: 0
Latest comments:
  • suraj sharma Sep 06, 2019 11:06:
    Brother masin me error E066
    Solab kaise kare