Table of Contents
Advertisement
Simrad TV80 Reference Manual
Context
In a large system with many sensors in simultaneous use, it can be useful to have different
ways of having the information presented. According to the operating scenario or your
personal preferences, you can choose to edit the content of a view or creating a new one and
apply that selection to your current presentation.
The TV80 has a built-in gauges library with lots of visual elements that can be placed in the
sensor views. The gauges will help you identify visually the data received from different
sensors. Depending on the gauge selected and the properties assigned to it, your presentation
will show different information. You can choose to place as many gauges as you want in a
view to make your operation visually easier.
Procedure
1
Select the view you want to edit.
The "active" view is shown with a thicker red border frame.
2
Drag the cursor to the right side of the active view.
The
shortcut menu opens.
View
3
Select
Edit View
The Designer module opens.
4
Depending on your needs, you can:
a
Select
Add
b
Select
Remove
c
Select the
Rescale
5
Select
and then
Save
Related topics
Opening the Designer module, page 167
Gauges dialog box, page 181
Edit Gauge dialog box, page 183
Loading an existing catch monitoring view
The
dialog box allows you to create, edit and delete the content of a view. You
Load View
can also select an existing view and put it into use.
Context
In the TV80, the presentation of sensor data is organized in views. The TV80 allows you to
create as many views as you may need in order to have full control of your operation. Each
96
.
on the top bar if you want to add a new gauge.
if you want to delete a selected gauge.
buttons in order to enlarge or reduce all the gauges in a view.
to save all the parameters and close the Designer module.
Close
406388/B
Advertisement
Table of Contents
