Reset Catch Counters Function - Simrad TV80 Reference Manual

Simrad TV80 Reference Manual
Catch/Bottom Filter
This is a median filter. The
from the catch and bottom contact sensors. This will reduce jitter in the presentation.
The default setting of the filter is Weak.
• In Off mode, the filter is disabled.
• In Weak mode, the data from the last three sensor transmissions are median filtered.
• In Medium mode, the data from the last five sensor transmissions are median
filtered.
• In Strong mode, the data from the last seven sensor transmissions are median
filtered.
Related topics
Adjusting the receiver sensitivity for the PI50 and PI60 Receiver Units, page 124
Reducing noise disturbance from the data received on a SR15 or SR70 Receiver Unit,
page 125

Reset Catch Counters function

The presentations provided for catch monitoring sensors have a timer feature. Select this
option to reset the built-in timer function.
How to open
This function is opened from the
Description
The catch and bottom contact sensor presentations both have a time feature. Each timer
indicates how many times the sensor has been activated during a tow. Select this option to
reset the timers to zero -0-. You will not be asked for confirmation.
196
is used to restrict the change of state
Catch/Bottom Filter
menu.
Operation
406388/B