Table of Contents
Advertisement
Details
Recording File Path
You can define the destination folder of the recorded receiver data files. By default,
the recorded receiver files are .dat files.
Recording File Size
You can define the maximum size interval of the recorded receiver data files. When
the recorded file achieves the maximum size defined, it will be stored and a new file
will be created automatically.
Recording on/off
This is an "on/off" switch. Select the box to enable the function.
Remove
Select to remove the specified receiver from the system.
Measurements dialog box
The
dialog box displays all the readings the TV80 is currently receiving
Measurements
from the sensors installed. With just a look you can easily identify all the measurements,
the channel the information is coming through and if the TV80 is acknowledging it. The
dialog box will vary according to the selected communication port.
Measurements
How to open
The
dialog box, is opened from the
Measurements
box. To open, select the inspection point at the very left of every "block diagram".
The
dialog box is located on the
Installation
Description
Every external equipment connected to the TV80 offers one or more measurements. A
gauge allows you to see the information you want from the sensor you want and with the
appearance you want. You can view on your screen presentation any measurement received
by the TV80 with a gauge of your choice. In the
see all the measurements received in a specific port and if the TV80 is validating it.
406388/B
Functions and dialog boxes
page on the
I/O Setup
menu.
Setup
dialog box, you can easily
Measurements
dialog
Installation
257
Advertisement
Table of Contents
